Labjaws Connectors and Holders by Talboys
Regular Holders
Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required.
|
 |
| Regular Holder |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Stainless Steel |
0 to 18mm (0 to 0.71") |
916359 |
$46.00 |
Add to Cart |
| Nickel-Plated Zinc |
0 to 18mm (0 to 0.71") |
916051 |
$18.00 |
Add to Cart |
Jumbo Holder
Stainless steel electro-polished finish or aluminum construction. Ideal for holding clamps to lab-frames or ring stands.
|
 |
| Jumbo Holder |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Stainless Steel |
0 to 21mm (0 to 0.83") |
916357 |
$46.00 |
Add to Cart |
| Aluminum |
0 to 21mm (0 to 0.83") |
916050 |
$27.00 |
Add to Cart |
Heavy-Duty Holder
For mounting stirrers and other apparatus. Clamp is constructed of strong aluminum alloy; fitted with over-sized for very secure positioning. Rods supported on 102mm (4") long surface to avoid vibration and wobble.
|
|
| Heavy-Duty Holder |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Aluminum |
6 to 24mm (0.24 to 0.95") |
112 |
$77.00 |
Add to Cart |
Swivel Holder
Stainless steel electro-polished finish or nickel-plated zinc construction. Two rod holders with center swivel capacity allow tilting of clamps at any angle in parallel planes. Outside adjustment screw allows close proximity between items being held.
|
 |
| Swivel Holder |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Stainless Steel |
0 to 19mm (0 to 0.75") |
916368 |
$75.00 |
Add to Cart |
| Nickel-Plated Zinc |
0 to 19mm (0 to 0.75") |
916065 |
$25.00 |
Add to Cart |
All-Position Clamp Holder
Surpass standard holding capabilities. The all-position clamp holder permits adjustment at any angle in any plane. Holders are set at 90° to each other, connected by a 90° connector, allowing 360° rotation.
Nickel-plated zinc construction.
|
|
| All-Position Clamp Holder |
| Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| 0 to 19mm (0 to 0.75") |
916085 |
$50.00 |
Add to Cart |
Hook Connector
Stainless steel electro-polished finish or nickel-plated zinc construction. Simple, versatile, and easy-to-use. Hook connectors allow one-handed assembly of two components with one adjustment screw.
|
 |
| Hook Connector |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Stainless Steel |
0 to 13mm (0 to 0.51") |
916358 |
$26.00 |
Add to Cart |
| Nickel-Plated Zinc |
0 to 13mm (0 to 0.51") |
916128 |
$10.00 |
Add to Cart |
End-to-End Connector
Extend the length of lab-frame rods. Strong aluminum alloy connector permits end-to-end joining of rods. Precision boring of connector ensures perfect alignment of rods. Corrosion-resistant. Comes with two set screws.
|
|
| End-to-End Connector |
| End-to-End Connector |
Part Number |
List Price |
Add to Cart |
| 0 to 13mm (0 to 0.51") |
916133 |
$19.00 |
Add to Cart |
Rod End Connector
Stainless steel electro-polished finish or nickel-plated zinc construction. Holds rods firmly at 90°. Use when semi-permanent installations are required. Comes with two set screws and is precision bored for close fit.
|
 |
| Rod End Connector |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Stainless Steel |
0 to 13mm (0 to 0.51") |
916362 |
$29.00 |
Add to Cart |
| Nickel-Plated Zinc |
0 to 13mm (0 to 0.51") |
916126 |
$12.00 |
Add to Cart |
S-Connector
Stainless steel electro-polished finish or nickel-plated zinc. Clamp is ideal for constructing lab-frames or other supports requiring the connection of two perpendicular rods. Clamp connects two 13mm (0.51") rods at 90° angle and features separate adjustment screws for each rod location.
|
 |
| S-Connector |
| Material |
Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| Stainless Steel |
0 to 13mm (0 to 0.51") |
916355 |
$27.00 |
Add to Cart |
| Nickel-Plated Zinc |
0 to 13mm (0 to 0.51") |
916127 |
$17.00 |
Add to Cart |
Frame Connector (Pack of 12)
Improved contour delivers simplicity and strength. Angled adjustment screws allow easy set-up and prevent misalignment. Smooth, rounded surfaces are easy-to-clean. Small size maximizes lab-frame space. Bright dipped aluminum finish sealed with silicon for maximum protection against corrosion.
|
|
| Frame Connector (Pack of 12) |
| Min. to Max. Grip Size |
Part Number |
List Price |
Add to Cart |
| 0 to 13mm (0 to 0.51") |
916125 |
$174.00 |
Add to Cart |
Universal Stirrer Mounting Bracket
Use to mount stirrers and other devices to lab-frames. Aluminum mounting bracket with attachment screws.
|
|
| Universal Stirrer Mounting Bracket |
| Max. Weight Mounted |
Min. to Max. Grip |
Part Number |
List Price |
Add to Cart |
| 5lbs (2.27kg) |
0 to 20mm (0 to 0.78") |
916134 |
$7.00 |
Add to Cart |
Multi-Rod Connector
Maximum adjustment capability within one connector. Two adjustment rods fit into the oval hole in the connector, preventing turning when tightened. Side and front 13mm (0.51") holes allow creation of a variety of configurations. Nickel-plated zinc construction.
|
|
| Multi-Rod Connector |
| Min. to Max. Rod Size |
Part Number |
List Price |
Add to Cart |
| 0 to 13mm (0 to 0.51") |
916131 |
$29.00 |
Add to Cart |
Wrench
Special adjusting wrench is for use with lab-frame items with set screws.
|
|
| Wrench |
| Length |
Part Number |
List Price |
Add to Cart |
| 79mm (3.11") |
916139 |
$43.00 |
Add to Cart |
Channel Connector
Special connector fastens lab-frame rod to steel 41mm (1.61") channels. Loosen the connector and slide up or down for easy adjustment of rod position.
|
|
| Channel Connector |
| Dimensions |
Part Number |
List Price |
Add to Cart |
| 33 x 40mm (1.3 x 1.58") |
916130 |
$18.00 |
Add to Cart |
Horizontal Mounting Bars with Coupler
Threaded end for direct installation into channels. Comes with spring coupler for use in steel 41mm (1.61") channels. Locking nut included. Use with steel channel frames.
|
|
| Horizontal Mounting Bars with Coupler |
| Bar Length |
Part Number |
List Price |
Add to Cart |
| 51mm (2") |
916135 |
$22.00 |
Add to Cart |
| 102mm (4") |
916136 |
$25.00 |
Add to Cart |
| 152mm (6") |
916137 |
$27.00 |
Add to Cart |
| 203mm (8") |
916138 |
$29.00 |
Add to Cart |
Talboys Laboratory Equipment is proudly manufactured in the U.S.A.