- Electronic tilt adjustment
- Displays for speed/tilt angle and time
- Timer with audible alarm
- 2 year warranty
The Talboys Advanced 1000RS Rocking Shaker is ideal for cell culture work and is designed to be used in a variety of environmental conditions.
Operating Features:
Low Profile Design: Takes up less space and easily fits into most fume hoods and incubators. Cast aluminum base offers durability and added stability.
Microprocessor Control: The microprocessor control provides electronic tilt angle adjustment which allows user to easily adjust rocking angle from 0 to 15° while unit is operating. Precise speed control provides smooth low-speed rocking motion down to 1rpm.
Triple Eccentric Drive: Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation.
LED Display: Touch pad controls with easy-to-read, independent LED displays for speed/tilt angle, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last settings, even after power has been turned off.
Safety Features:
Overload Protection: Audible and visual signals will activate when system detects an obstruction or overload of the tray.
Ramping Feature: Slowly increases speed to desired set-point to avoid splashing.
Audible Alarm: In timed mode, alarm will sound when the time reaches zero.
Spill-Resistant Design: Channels fluids away from internal components.
Operating Conditions:
Unit can be run in cold rooms, incubators, and CO2
environments
from -10 to 60°C
(14 to 140°F).
Applications:
Staining and destaining gels, hybridization procedures, hematology, and blotting techniques.
980530
| Specifications: | |
|---|---|
| Speed Range | 1 to 50rpm* |
| Speed Accuracy | ±1% |
| Tilt Angle | 0 to 15° * |
| Timer | 1 second to 160 hours |
| Maximum Weight Capacity | 10lbs (4.5kg)** |
| Tray Material | Aluminum |
| Tray Dimensions (L x W) | 12.75 x 10"
(32.4 x 25.4cm) |
| Overall Dimensions
(L x W x H) |
17 x 11 x 5 "
(43.2 x 27.9 x 12.7cm) |
| Ship Weight | 15.5lbs (7kg) |
* Maximum speed/tilt angle may vary with heavy or unbalanced loads.
** Centered on tray.
Ordering Information:
Units include a 92" (234cm) detachable, 3-wire cord and plug (230 volt units are supplied with Euro type plug). Units are also supplied with a 12.75 x 10" (32.4 x 25.4 cm) non-skid rubber mat. Dimpled Mat and Stacking Tray accessories are available. 2 year limited warranty on parts and labor.